Automated dimensional measurement with GD&T, instant pass/fail, and audit-ready reporting. From metrology lab to inline production. Integrates with PolyWorks or runs standalone.
Download product sheets:
Manufacturing quality demands are accelerating – 100% inspection mandates, tightening tolerances, regulatory documentation – while CMM capacity stays flat and metrology talent gets harder to find.
The result: inspection is the bottleneck. Parts queue for hours. Feedback comes too late. Sampling isn’t enough. And adding another CMM doesn’t solve the workflow problem.
Choose the configuration that fits your application. Scale from a single camera in the metrology lab to a fully automated inline inspection cell.
Metrology lab supplement or offline inspection. Diverse parts, flexible positioning, manual operation.
Multiple cameras for full coverage without repositioning. Complex geometries captured simultaneously.
Automated 360-degree capture. High-volume rotational and prismatic parts. Operator presses start and gets results.
DepthScan on a robot arm for large or complex parts. Programmable scan paths. Beside-line or inline deployment.
Maximum flexibility and coverage. Combined robot positioning with automated rotation for complete inspection cells.
Standard-referenced metrology performance, traceable to certified artifacts. The numbers below are the published acceptance test for DepthScan Fixed Focus at 500 mm working distance, full-resolution mode.
Probing Form Error (P_F)
Sphere fit residual on certified reference sphere.
Probing Size Error (P_S)
Diameter measurement deviation from calibrated value.
Sphere-Spacing Distance (SD)
Center-to-center distance error on dual-sphere artifact.
Flatness Error (F)
Plane fit residual on certified reference flat.
Choose the camera model that fits your part profile and cycle time. All three run the same software, the same recipes, and the same workflow.
Factory-calibrated to a single working distance. Most economical model. Best for production lines where part size and standoff are consistent.
30+ fps in high-speed mode at a single working distance. Best for inline conveyors and fast-cycle inspection where sub-second capture matters.
Multiple factory-calibrated working distances on one unit. Best for variable parts, lab use, or robot-mounted scanning where standoff changes per part.
Your metrology engineer sets up the inspection once. Any operator runs it every time.
- Choose CAD-based or golden model inspection
- Choose PolyWorks or Ajile measurement suite
- Define measurements, tolerances, GD&T
- Run test inspection to validate
- Save recipe - ready for production
- Select recipe, enter serial number, press Start
- System captures, measures, determines pass/fail
- Review results on screen or reprojected on part
- Next part - complete the batch
- Export report, upload to database
Multi-camera DepthScan cell – the same hardware that captures the scan reprojects results back onto the part surface. Production-capture deviation photo coming.
After scanning, DepthScan projects the color-coded deviation map directly onto the physical part surface using the same projector that captured the scan. No fixture required – the system aligns digitally and projects results at 1:1 scale.
Operators see exactly where deviations are without interpreting a screen. Rework guidance, go/no-go verification, and multi-person review – all projected directly onto the part.
DepthScan integrates natively with PolyWorks. Use your existing PolyWorks license as the measurement engine – same GD&T definitions, same workflows, automated capture and reporting.
All measurements, tolerances, pass/fail per feature. PDF or database export.
Per-part results with statistical summary – Cp, Cpk, mean, standard deviation across the run.
Every part linked to measurement data, timestamp, and operator ID. Full traceability chain.
Export to your QMS, MES, or ERP. SPC-compatible data formatting included.
DepthScan supplements your CMMs – handles routine volume so your CMMs handle complexity.
CMM offloading, OEM mandate compliance, beside-line inspection for turned components, housings, and shafts.
Audit-ready reporting with full traceability. Repeatability-verified measurement system. Data formatted to support your quality system documentation.
Complex geometry inspection with full-surface profile tolerance verification. Traceable calibration per VDI/VDE 2634 supports audit requirements.
Recipe-based flexibility for diverse part families. One system, many part numbers. No fixture inventory.
Workflow Assessment
30-minute call. Understand your process, recommend a cell configuration. No commitment.
Sample Evaluation
Send 2-3 parts with GD&T. We measure and compare to your CMM data.
Pilot Program
60-90 days on your floor. Defined success criteria. 100% fee credited toward purchase.
Production Deployment
Full installation, training, and ongoing support. Expand to additional lines as needed.
Tell us about your inspection challenge. We’ll recommend the right configuration and show you what’s possible with your parts.
Distribute DepthScan Inspection
Are you a PolyWorks distributor or metrology hardware reseller? Your customers already need inspection automation. Let's talk.